10 OZ. CLEAR SILICONE SEALANT CARTRIDGE
Directions
Gorilla at Work
Related Products
FAQs

10 OZ. CLEAR SILICONE SEALANT CARTRIDGE

TOUGH, CLEAR, 100% SILICONE SEALANT

Gorilla 100%  Silicone Sealant* is great for kitchen, bath, window, doors, auto, marine plumbing, gutters and more! Ready for water exposure in just 30 minutes, this waterproof sealant is mold & mildew resistant. The clear silicone sealant won't yellow, shrink or crack over time!
 
 

*as cured

MSDS

10 OZ. CLEAR SILICONE SEALANT CARTRIDGE Directions

All surfaces should be clean and free of dirt, grease, oil and old sealant. Best if used above 40°F.

TO OPEN: 

CARTRIDGE: Cut nozzle at 45° angle to desired bead size. Puncture inner foil seal.

TUBE: Unscrew cap, fold and screw-on nozzle. Cut to desired bead size.

TO USE: 

CARTRIDGE: 1) Insert into cartridge gun. 2) Apply sealant, pushing bead ahead of nozzle. 3) Smooth bead immediately after application, before skin forms.

TUBE: 1) Apply sealant, pushing bead ahead of nozzle. 2) Smooth bead immediately after application, before skin forms.

Storage: Replace cap tightly to prevent material from curing. Store in cool, dry location. To re-use nozzle, remove sealant from nozzle once cured.

Clean-Up: Wipe wet sealant off project immediately with a dry cloth. Isopropyl alcohol may be used according to solvent manufacturer’s instructions.

For First Aid and SDS information, click here.

Gorilla At Work

Want to see how tough our products are? Watch the videos below to see them in action.

10 OZ. CLEAR SILICONE SEALANT CARTRIDGE®FAQs

Is the nozzle reusable?

Yes. For the tube, we recommend removing the nozzle after each use and replacing the cap to store tube (nozzle can hang from side of tube).For the nozzle, let sealant cure completely and then remove cured sealant manually.

For the cartridge, let sealant cure in nozzle completely and then remove cured sealant manually.