10 OZ. WHITE SILICONE SEALANT CARTRIDGE
Directions
Gorilla at Work
Related Products
FAQs

10 OZ. WHITE SILICONE SEALANT CARTRIDGE

TOUGH, WHITE, 100% SILICONE SEALANT

Gorilla 100% Silicone Sealant* is great for kitchen, bath, window, doors, plumbing, gutters and more! Ready for water exposure in just 30 minutes, this sealant is mold & mildew resistant and won't yellow, shrink or crack over time!

 

*as cured

MSDS

10 OZ. WHITE SILICONE SEALANT CARTRIDGE Directions

TO OPEN: Cut nozzle at 45° angle to desired bead size. Puncture inner foil seal.

TO USE: All surfaces should be clean and free of dirt, grease, oil and old sealant. For gaps larger than ½ inch use backer rod. Best if applied above 40°F (5°C).

  1. Insert into cartridge gun.
  2. Apply sealant, pushing bead ahead of nozzle.
  3. Smooth bead immediately after application, before a skin forms.

30 MINUTE RAIN/SHOWER READY: Can be exposed to water in as little as 30 minutes based on a 3/16” bead at 70°F (21°C) and 50% humidity. Otherwise, wait 24 hrs.

CLEAN-UP: Wipe wet sealant off project immediately with a dry cloth. Isopropyl alcohol may be used according to solver manufacturer’s instructions.

STORAGE: Store in cool, dry location with nozzle attached. To re-use product, remove nozzle and clean out cured sealant from the tip.

LIFETIME GUARANTEE: The Gorilla Glue Company warrants this product meets indicated performance properties for as long as you own your home if product is properly used and stored. If not satisfied, return proof of purchase or remaining product for replacement product or refund. Refund will not exceed the full price of the product. The Gorilla Glue Company is not liable for damages in excess of purchase price. No other warranties, either expressed or implied are given or made. You may have rights that vary state to state, so above limitation and exclusions may not apply.

For First Aid and SDS information, click here.

Gorilla At Work

Want to see how tough our products are? Watch the videos below to see them in action.

10 OZ. WHITE SILICONE SEALANT CARTRIDGE®FAQs

Is the nozzle reusable?

Yes. For the tube, we recommend removing the nozzle after each use and replacing the cap to store tube (nozzle can hang from side of tube).For the nozzle, let sealant cure completely and then remove cured sealant manually.

For the cartridge, let sealant cure in nozzle completely and then remove cured sealant manually.