大猩猩透明強力雙面膠帶
Directions
Gorilla at Work
Related Products
FAQs

大猩猩透明強力雙面膠帶

堅韌,透明,耐用雙面膠帶

大猩猩透明強力雙面膠帶黏力特強,負重力高達15磅,同時透明度極高,即時提供全天候的強力黏合工作。可黏貼於平滑,粗糙,凹凸不平的表面。

 膠帶必須與表面緊貼,如黏貼位置不平整,膠帶不能與表面緊貼時將不能發揮黏合效果。

 

產品選擇

1吋 x 60吋

Safety Data Sheets

大猩猩透明強力雙面膠帶 Directions

大猩猩透明強力雙面膠帶使用方法

  1. 黏貼的位置必需為平整、乾淨、乾爽及不附污垢或油漬。每4" 膠帶可負重一磅。以垂直方向貼在物件的背面,盡量令負重範圍均勻分佈。避免觸及膠帶的黏貼面。
  2. 按適當長度剪裁並加以按壓,確保膠帶緊密貼上。
  3. 撕出透明保護膜並對準黏貼位置。
  4. 黏合後加以按壓,確保膠帶已緊密黏合,發揮極強的永久性黏合效果。

Gorilla At Work

Want to see how tough our products are? Watch the videos below to see them in action.

大猩猩透明強力雙面膠帶®FAQs

Is Gorilla Mounting Tape permanent?

Yes. Once Gorilla Mounting Tape is used to mount an object, it is meant to be held in place permanently, and not be removed.

How much weight will Gorilla Mounting Tape hold?

Gorilla Mounting Tape will hold up to 10 pounds per project.

How do I remove Gorilla Mounting Tape’s liner?

Once Gorilla Mounting Tape is pressed onto the surface of the object to be held, remove the liner by peeling it from a corner of the tape. This can be done by using a fingernail or similar object to separate the liner from the tape.

How do I remove Gorilla Mounting Tape?

Gorilla Mounting Tape is a permanent tape. Once applied, it can be difficult to remove, and can damage surfaces if the objects are pulled away from the surface.

If Gorilla Mounting Tape isn’t exposed and cannot be reached by hand between the mounted object and the surface, a prying motion on the object from one corner can sometimes remove it from the surface. Please note that damage to the surface can occur.

If Gorilla Mounting Tape is exposed and within reach between the mounted object and the surface, pull the tape parallel to the surface (or vertically downwards) to remove it from the object.

How much Gorilla Mounting Tape should I use on my project?

Use four inches of Gorilla Mounting Tape per pound of weight being held.