All surfaces should be clean and free of dirt, grease and oil. Best if used above 40°F.
1. Unscrew nozzle, cut tip of cartridge, replace nozzle and cut to desired bead size. Insert into cartridge gun.
2. Apply adhesive to one surface in a zig-zag pattern or inside perimeter of the object. Be careful of squeeze-out. When working on rough, uneven surfaces, use enough adhesive to fill gaps.
3. Within 10 minutes, press surfaces together and hold for 20-30 seconds. NOTE: Heavy items may require temporary support. Use in conjunction with mechanical fasteners when hanging large mirrors.
4. Allow 24 hours to cure. Note that cure times will increase with lower temperature, humidity and if bonding non-porous surfaces.