GORILLA GLUE 2oz.
Directions
Gorilla at Work
Related Products
FAQs

GORILLA GLUE 2oz.

TOUGH, EXPANDING, STICKS-TO-EVERYTHING GLUE

The product that started it all. Original Gorilla Glue built a name for itself with its incredible, industrial holding power and versatility. Water activated, it expands into materials to form an incredibly strong bond to virtually anything. Gorilla Glue is your solution for almost any project or repair. It’s 100% waterproof, safe for indoor and outdoor use and strong enough to stand up to the elements. Plus, its expansion allows it to penetrate the glued surface for a superior bond. Sand it, paint it, stain it. Simply stated, it’s the Toughest Glue on Planet Earth.

Available Sizes

3g Gorilla Glue Minis 2oz. 4oz. 8oz. 18oz. 36oz.

Clamp Time: 1-2 Hours // Open Time: 10-15 Minutes

Dry Time: 80% in 1-2 Hours // Dry Color: Light Tan

Full Cure: 24 Hours

MSDS

GORILLA GLUE 2oz. Directions

  1. Prepare and Dampen the Surfaces

    If you’re using Original Gorilla Glue for the first time, or bonding a new type of material, we always recommend trying a test piece first. To open a bottle larger than 2 ounces, cut the tip of the nozzle where it comes up to a point and starts to indent. The cap is attached to the side of the nozzle.

    Prepare your surfaces: All surfaces must be clean, dust free and tight fitting. For shiny surfaces, such as metals, glass and some plastics, roughen up the material to give the glue something to bite into.

    Damp It: Lightly dampen one surface with water. We recommend using a damp cloth or spraying with water. Do not saturate the surface. For dense hardwoods, lightly dampen both surfaces prior to gluing.

  2. Evenly Apply Gorilla Glue Onto the Dry Surface

    Glue It: Carefully apply onto the dry surface. Do not over apply. We recommend wearing gloves or spreading the glue with a disposable brush. In some instances, Gorilla Glue can be a skin sensitizer. If you are predisposed to skin reactions, please take the extra precaution.

    If you do get the glue on your skin, try removing it with a dry cloth or paper towel first (particularly if the glue is still tacky). If that doesn’t work, try washing with soap and cold water, or using an exfoliator with a gritty texture. Dry your skin and apply lotion. We do not recommend using any kind of alcohol or acetone. This actually strips the skin of its natural oils, which means the glue is more likely to stick.

  3. Clamp the Two Surfaces Together Tightly

    Clamp It: Make sure the clamping pressure is distributed evenly across the surface. Or, if you don’t have a clamp, use heavy objects or Gorilla Tape® to achieve the appropriate clamping pressure. For lighter objects, try using rubber bands to hold the pieces together tightly. Clamp objects for 1–2 hours. For best results, allow 24 hours to cure.

  4. Clean up

    If you need to remove any uncured “squeeze out” or wet glue, we recommend wiping with a dry cloth or using a standard paint thinner. Make sure to read and follow directions if using a paint thinner. Always wear gloves. Once the glue is dry, it is best removed mechanically: Try sanding, chiseling, scraping or picking. The dried glue will not damage tools.

  5. Storage Tips

    After each use, wipe the bottle’s lid and nozzle clean with a dry cloth. For 2 oz. bottles, tightly replace the lid after wiping clean and store in a cool, dry place. For bottle sizes 4 oz. and larger, we suggest squeezing excess air out of the bottle. While still squeezing, tightly replace the cap and then store in a cool, dry place. This helps eliminate moisture in the bottle.

For First Aid and SDS information, click here.

Gorilla At Work

Want to see how tough our products are? Watch the videos below to see them in action.

GORILLA GLUE 2oz.®FAQs

How do I remove Gorilla Glue from my body or skin?

It is strongly recommended that gloves are worn during application. If you do get Gorilla Glue on your skin, try removing it with a dry cloth or paper towel first (particularly if the glue is still tacky). If that doesn’t work, try washing with soap and cold water, or using an exfoliator with a gritty texture. Dry your skin and apply lotion. We do not recommend using any kind of alcohol, acetone, or other solvent.

Why do I need to add moisture before applying Gorilla Glue?

Gorilla Glue is a moisture activated polyurethane adhesive, therefore, you need to apply a small amount of moisture to one surface. Then apply glue to the dry surface and clamp. For dense hardwoods, lightly dampen both surfaces prior to gluing.

How do I remove Gorilla Glue from my surface?

f you need to remove any uncured “squeeze out” or wet glue, we recommend wiping with a dry cloth or using a standard paint thinner. Make sure to read and follow directions if using a paint thinner. Always wear gloves. Once Gorilla Glue is dry, it is best removed mechanically: Try sanding, chiseling, scraping or picking. The dried glue will not damage tools.

GORILLA Clear Glue 3.75 oz.
Directions
Gorilla at Work
Related Products
FAQs

GORILLA Clear Glue 3.75 oz.

VERSATILE, TOUGH, CLEAR

The strength and versatility you have come to expect from Gorilla Glue is now available in an easy to use, crystal clear, non-foaming formula. Clear Gorilla Glue is incredibly strong and is ideal for indoor and outdoor applications and bonds virtually everything.

MSDS

GORILLA Clear Glue 3.75 oz. Directions

 

 

 

 

 

 

 

 

 

 

 

1. Damp It
For non-porous surfaces only (i.e. metal, glass, plastics), lightly dampen one surface with water. Do not add water to bottle.
 
2. Glue It
Apply Clear Gorilla Glue to surfaces. Best at room temperature.
 
3. Clamp It
Clamp objects together for 2 hours. Full cure in 24 hrs. You can use heavy objects to achieve clamping pressure.
*Not recommended for use on polyethylene or polypropylene plastics.

 

Storage Tips

After each use, wipe nozzle clean with a dry cloth and tightly replace lid. Store in a cool, dry place with exposure to light. Lack of light and heat can cause product to yellow. Cured glue can be removed from work surface with chisel, scraper or sandpaper. Store away from children and animals.

For First Aid and SDS information, click here.

Gorilla At Work

Want to see how tough our products are? Watch the videos below to see them in action.

GORILLA Clear Glue 3.75 oz.®FAQs

What is the difference between Clear Gorilla Glue and Gorilla Super Glue?

Gorilla Super Glue is designed to dry fast and works best with tight fitting joints. It’s perfect for a fix you need done fast. Clear Gorilla Glue offers an extended working time, which allows you to reposition your project. It is also gap filling which allows you to glue uneven surfaces.

 
GORILLA Clear Glue 1.75 oz.
Directions
Gorilla at Work
Related Products
FAQs

GORILLA Clear Glue 1.75 oz.

TOUGH, EXPANDING, STICKS-TO-EVERYTHING GLUE

The strength and versatility you have come to expect from Gorilla Glue is now available in an easy to use, crystal clear, non-foaming formula. Clear Gorilla Glue is incredibly strong and is ideal for indoor and outdoor applications and bonds virtually everything.
MSDS

GORILLA Clear Glue 1.75 oz. Directions

 

 

 

 

 

 

 

 

 

 

 

 

1. Damp It
For non-porous surfaces only (i.e. metal, glass, plastics), lightly dampen one surface with water. Do not add water to bottle.
 
2. Glue It
Apply Clear Gorilla Glue to surfaces. Best at room temperature.
 
3. Clamp It
Clamp objects together for 2 hours. Full cure in 24 hrs. You can use heavy objects to achieve clamping pressure.
*Not recommended for use on polyethylene or polypropylene plastics.

 

Storage Tips

After each use, wipe nozzle clean with a dry cloth and tightly replace lid. Store in a cool, dry place with exposure to light. Lack of light and heat can cause product to yellow. Cured glue can be removed from work surface with chisel, scraper or sandpaper. Store away from children and animals.

For First Aid and SDS information, click here.

Gorilla At Work

Want to see how tough our products are? Watch the videos below to see them in action.

GORILLA Clear Glue 1.75 oz.®FAQs

What is the difference between Clear Gorilla Glue and Gorilla Super Glue?

Gorilla Super Glue is designed to dry fast and works best with tight fitting joints. It’s perfect for a fix you need done fast. Clear Gorilla Glue offers an extended working time, which allows you to reposition your project. It is also gap filling which allows you to glue uneven surfaces.

 
Is Clear Gorilla Glue waterproof?

Clear Gorilla Glue is water resistant, and can withstand intermittent exposures, however is not meant for a constant soak. Original or White Gorilla Glue are 100% waterproof and can withstand soaking and longer term water exposure, assuming the materials being are not significantly affected by the water.

 
How do I maximize the shelf life of Clear Gorilla Glue?

After use, wipe the nozzle with a dry cloth, close cap tightly and store at room temperature with access to light, if possible.

大猩猩膠3克4支裝
Directions
Gorilla at Work
Related Products
FAQs

大猩猩膠3克4支裝

堅固,澎漲,可黏合任何物件的膠水

Gorilla 膠水內的泡沫會在凝固後膨脹3倍,只需用0.5安士的膠水便可黏合1平方呎的面積。用途廣泛,適用於一般家居內外修復、維修及創意項目。可黏合木材,石材,金屬,陶瓷,發泡膠,玻璃,瓦磚,水泥等其他無數物料!100%防水,在潮濕環境下亦能保持良好黏力。耐冷耐熱,在極熱或極冷的環境下亦不受影響!可上漆、染色、打磨,容易達至最終的理想效果。

產品選擇

Gorilla 膠水3g 4支裝.2安士. 4安士. 8安士. 18安士. 36安士.

夾合時間: 1-2 小時// 黏合時間: 10-15 分鐘

乾透時間: 1-2小時達80% // 乾透顏色: 淺啡色

完全固化: 24小時

MSDS

大猩猩膠3克4支裝 Directions

  1. Prepare and Dampen the Surfaces

    If you’re using Original Gorilla Glue for the first time, or bonding a new type of material, we always recommend trying a test piece first. To open a bottle larger than 2 ounces, cut the tip of the nozzle where it comes up to a point and starts to indent. The cap is attached to the side of the nozzle.

    Prepare your surfaces: All surfaces must be clean, dust free and tight fitting. For shiny surfaces, such as metals, glass and some plastics, roughen up the material to give the glue something to bite into.

    Damp It: Lightly dampen one surface with water. We recommend using a damp cloth or spraying with water. Do not saturate the surface. For dense hardwoods, lightly dampen both surfaces prior to gluing.

  2. Evenly Apply Gorilla Glue Onto the Dry Surface

    Glue It: Carefully apply onto the dry surface. Do not over apply. We recommend wearing gloves or spreading the glue with a disposable brush. In some instances, Gorilla Glue can be a skin sensitizer. If you are predisposed to skin reactions, please take the extra precaution.

    If you do get the glue on your skin, try removing it with a dry cloth or paper towel first (particularly if the glue is still tacky). If that doesn’t work, try washing with soap and cold water, or using an exfoliator with a gritty texture. Dry your skin and apply lotion. We do not recommend using any kind of alcohol or acetone. This actually strips the skin of its natural oils, which means the glue is more likely to stick.

  3. Clamp the Two Surfaces Together Tightly

    Clamp It: Make sure the clamping pressure is distributed evenly across the surface. Or, if you don’t have a clamp, use heavy objects or Gorilla Tape® to achieve the appropriate clamping pressure. For lighter objects, try using rubber bands to hold the pieces together tightly. Clamp objects for 1–2 hours. For best results, allow 24 hours to cure.

  4. Clean up

    If you need to remove any uncured “squeeze out” or wet glue, we recommend wiping with a dry cloth or using a standard paint thinner. Make sure to read and follow directions if using a paint thinner. Always wear gloves. Once the glue is dry, it is best removed mechanically: Try sanding, chiseling, scraping or picking. The dried glue will not damage tools.

  5. Storage Tips

    After each use, wipe the bottle’s lid and nozzle clean with a dry cloth. For 2 oz. bottles, tightly replace the lid after wiping clean and store in a cool, dry place. For bottle sizes 4 oz. and larger, we suggest squeezing excess air out of the bottle. While still squeezing, tightly replace the cap and then store in a cool, dry place. This helps eliminate moisture in the bottle.

For First Aid and SDS information, click here.

Gorilla At Work

Want to see how tough our products are? Watch the videos below to see them in action.

大猩猩膠3克4支裝®FAQs

大猩猩膠36安士裝
Directions
Gorilla at Work
Related Products
FAQs

大猩猩膠36安士裝

堅固,澎漲,可黏合任何物件的膠水

HKD 360.00

Gorilla 膠水內的泡沫會在凝固後膨脹3倍,只需用0.5安士的膠水便可黏合1平方呎的面積。用途廣泛,適用於一般家居內外修復、維修及創意項目。可黏合木材,石材,金屬,陶瓷,發泡膠,玻璃,瓦磚,水泥等其他無數物料!100%防水,在潮濕環境下亦能保持良好黏力。耐冷耐熱,在極熱或極冷的環境下亦不受影響!可上漆、染色、打磨,容易達至最終的理想效果。

產品選擇

Gorilla 膠水3g 4支裝.2安士. 4安士. 8安士. 18安士. 36安士.

夾合時間: 1-2 小時// 黏合時間: 10-15 分鐘

乾透時間: 1-2小時達80% // 乾透顏色: 淺啡色

完全固化: 24小時

MSDS

大猩猩膠36安士裝 Directions

  1. Prepare and Dampen the Surfaces

    If you’re using Original Gorilla Glue for the first time, or bonding a new type of material, we always recommend trying a test piece first. To open a bottle larger than 2 ounces, cut the tip of the nozzle where it comes up to a point and starts to indent. The cap is attached to the side of the nozzle.

    Prepare your surfaces: All surfaces must be clean, dust free and tight fitting. For shiny surfaces, such as metals, glass and some plastics, roughen up the material to give the glue something to bite into.

    Damp It: Lightly dampen one surface with water. We recommend using a damp cloth or spraying with water. Do not saturate the surface. For dense hardwoods, lightly dampen both surfaces prior to gluing.

  2. Evenly Apply Gorilla Glue Onto the Dry Surface

    Glue It: Carefully apply onto the dry surface. Do not over apply. We recommend wearing gloves or spreading the glue with a disposable brush. In some instances, Gorilla Glue can be a skin sensitizer. If you are predisposed to skin reactions, please take the extra precaution.

    If you do get the glue on your skin, try removing it with a dry cloth or paper towel first (particularly if the glue is still tacky). If that doesn’t work, try washing with soap and cold water, or using an exfoliator with a gritty texture. Dry your skin and apply lotion. We do not recommend using any kind of alcohol or acetone. This actually strips the skin of its natural oils, which means the glue is more likely to stick.

  3. Clamp the Two Surfaces Together Tightly

    Clamp It: Make sure the clamping pressure is distributed evenly across the surface. Or, if you don’t have a clamp, use heavy objects or Gorilla Tape® to achieve the appropriate clamping pressure. For lighter objects, try using rubber bands to hold the pieces together tightly. Clamp objects for 1–2 hours. For best results, allow 24 hours to cure.

  4. Clean up

    If you need to remove any uncured “squeeze out” or wet glue, we recommend wiping with a dry cloth or using a standard paint thinner. Make sure to read and follow directions if using a paint thinner. Always wear gloves. Once the glue is dry, it is best removed mechanically: Try sanding, chiseling, scraping or picking. The dried glue will not damage tools.

  5. Storage Tips

    After each use, wipe the bottle’s lid and nozzle clean with a dry cloth. For 2 oz. bottles, tightly replace the lid after wiping clean and store in a cool, dry place. For bottle sizes 4 oz. and larger, we suggest squeezing excess air out of the bottle. While still squeezing, tightly replace the cap and then store in a cool, dry place. This helps eliminate moisture in the bottle.

For First Aid and SDS information, click here.

Gorilla At Work

Want to see how tough our products are? Watch the videos below to see them in action.

大猩猩膠36安士裝®FAQs