大猩猩超能膠水3克裝
Directions
Gorilla at Work
Related Products
FAQs

大猩猩超能膠水3克裝

堅固,快速,一黏即合的膠水

它的高強度和快速黏合讓大猩猩超能膠可應付各項家居項目。Gorilla超能膠能在短短30-60秒內乾透,無需固定物件黏合位置。獨特的橡膠粒子能增強韌度及提高抵受撞擊的能力,使修復後的位置不易破碎!防塞樽口及金屬針蓋設計時刻保持樽口清潔及防止空氣進入樽內令膠水乾涸。可黏合基本任何東西,包括橡膠、紙張、木材、金屬、陶瓷,大部份塑膠物料及其他無數物料!

 

產品選擇

3g, 2支3g, 10g, 15g

可選擇瓶裝、牙膏擠裝、或兩用瓶咀裝

夾合時間: 30-60秒//黏合時間: 一黏即合,不能移位

乾透時間: 輕按位置固定1-5分鐘//乾透顏色: 半透明

完全固化: 24小時

MSDS

大猩猩超能膠水3克裝 Directions

1. Protect Work Area From Spills

2. Clean and Dry Surfaces to Be Bonded

3. Apply Gorilla Super Glue
Apply a small amount of Gorilla® Super Glue to one surface. Excess glue can cause delayed or failed bond. One drop of super glue covers one square inch.

4. Secure
Press two surfaces together for 10-45 seconds to achieve bond. Note that gaps and uneven surfaces may cause delayed bonding.

For First Aid and SDS information, click here.

Gorilla At Work

Want to see how tough our products are? Watch the videos below to see them in action.

大猩猩超能膠水3克裝®FAQs

What should I do if I think a human or animal ingested Gorilla Super Glue?

For medical emergencies, call 1-800-420-7186 anytime to reach a member of our product safety team. Additional product safety and first aid information can be found here.

Why isn’t my bottle of Gorilla Super Glue filled to the top?

For high performance and usability, the adhesive needs to be protected from air. One way to keep the air out of the adhesive is by packaging in thick plastic bottles. If the thicker plastic bottle was completely full of adhesive, it would be too hard to squeeze the glue out of the bottle.

 
How is Gorilla Super Glue different than Gorilla Glue?

Gorilla Super Glue is a cyanoacrylate adhesive, while Gorilla Glue is a polyurethane. Unlike Gorilla Glue, Gorilla Super Glue does not require extended clamp time or moisture to activate. It does not foam during set up. In addition, Gorilla Super Glue is recommended primarily for indoor applications only and is ideal for smaller repairs that require an instant bond and projects where clamping is not needed.

 
How do I remove Gorilla Super Glue from my surface?

To remove uncured Gorilla Super Glue, use a towel dampened with acetone or isopropyl alcohol to blot the area. Several applications may be necessary to completely remove the uncured glue. For removal of cured Gorilla Super Glue from the surface of your project, soak bonded area with warm soapy water or acetone. The adhesive should begin to soften, but many applications may be necessary. Keep in mind that isopropyl alcohol and acetone can damage some surface materials, such as countertops and some plastics. Always test in a small, unseen area first.