GORILLA SUPER GLUE GEL 3g x 2 tubes
Directions
Gorilla at Work
Related Products
FAQs

GORILLA SUPER GLUE GEL 3g x 2 tubes

TOUGH, NO-RUN, CONTROLLED, INSTANT GLUE

Gorilla Super Glue Gel is an easy-to-use, thicker and more controlled formula great for multiple surfaces and vertical applications. Specially formulated to absorb drops, impacts and shocks, this tough and precise gel bonds plastic*, wood, metal, ceramic, rubber, leather, paper and more! In addition to its high performance formula, we’ve added an anti-clog cap with a metal pin inside to ensure an airtight seal for maximum reusability. It’s Gorilla tough, every time. *Not recommended for use on polyethylene or polypropylene plastic

Available Sizes

 15g, 3g x2 tubes

Clamp Time: 10-30 Seconds // Open Time: Not Repositionable

Dry Time: Light Handling after 1-5 Minutes // Dry Color: Translucent

Full Cure: 24 Hours

MSDS

GORILLA SUPER GLUE GEL 3g x 2 tubes Directions

Gorilla Super Glue Gel Directions

1.
Protect Work Area From Spills

2.Clean and Dry Surfaces to Be Bonded

3.Prepare Gorilla Super Glue Gel

With cap on bottle, shake product, then turn product upside down and tap on hard surface to shake gel into bottle nozzle.

4.Apply Gorilla Super Glue Gel

Remove cap and apply a small amount of Gorilla Super Glue Gel to one surface. Only one dab per square inch recommended. Set time can vary based on the amount of glue and type of surface glued. Excess glue can cause delayed or failed bond.

5.Secure

Press the two surfaces together for about 10–30 seconds. Note that gaps and uneven surfaces may cause delayed bonding. Wait 24 hours for a full cure.

Gorilla At Work

Want to see how tough our products are? Watch the videos below to see them in action.

GORILLA SUPER GLUE GEL 3g x 2 tubes®FAQs

How is Gorilla Super Glue Gel different than liguid Gorilla Super Glue?

Gorilla Super Glue Gel is a thicker and more controllable formula than Gorilla Super Glue. It’s great for projects where precision is key.

 
GORILLA SUPER GLUE PRECISE GEL 15g
Directions
Gorilla at Work
Related Products
FAQs

GORILLA SUPER GLUE PRECISE GEL 15g

TOUGH, NO-RUN, CONTROLLED, INSTANT GLUE

Gorilla® Super Glue Precise Gel is an easy-to-use, thicker formula* combined with a precision tip and large tube, so it’s easy to apply with control and precision. Great for multiple surfaces and vertical applications.  

*Versus liquid Gorilla Super Glue

MSDS

GORILLA SUPER GLUE PRECISE GEL 15g Directions

1. Protect work area from spills.
2. Clean and dry surfaces to be bonded.
3. To puncture, place cap and nozzle on the tube and
tighten down.
4. Apply a small amount of Gorilla® Super Glue Precise Gel to one surface. Only one drop per sq.
inch recommended. Set time can vary based on
amount of glue and type of surface glued. Excess
glue can cause delayed or failed bond.
5. Press the two surfaces together for about 10-45 seconds. Wait 24 hours for full cure.
6. After using, clean nozzle with a dry cloth and replace outer cap. Store in a cool, dry place.

Gorilla At Work

Want to see how tough our products are? Watch the videos below to see them in action.

GORILLA SUPER GLUE PRECISE GEL 15g®FAQs

How is Gorilla Super Glue different than Gorilla Glue?

Gorilla Super Glue is a cyanoacrylate adhesive, while Gorilla Glue is a polyurethane. Unlike Gorilla Glue, Gorilla Super Glue does not require extended clamp time or moisture to activate. It does not foam during set up. In addition, Gorilla Super Glue is recommended primarily for indoor applications only and is ideal for smaller repairs that require an instant bond and projects where clamping is not needed.

 
GORILLA SUPER GLUE 3g
Directions
Gorilla at Work
Related Products
FAQs

GORILLA SUPER GLUE 3g

TOUGH, FAST, FIX IT AND FORGET IT GLUE

Its high strength and quick set time make Gorilla Super Glue the go-to for a variety of household projects. Developed for long-lasting repairs in an instant, Gorilla Super Glue dries in 10–30 seconds and is reinforced with rubber for increased impact resistance. We call it Impact-Tough® because it stands up to wear and tear unlike any other instant glue. In addition to its high-performance formula, we’ve added an anti-clog cap with a metal pin inside to ensure an airtight seal for maximum reusability. It’s Gorilla tough, every time.

Available Sizes

Available in bottle and squeeze tube formats.

Clamp Time: 10-30 Seconds // Open Time: Not Repositionable

Dry Time: Light Handling after 1-5 Minutes // Dry Color: Translucent

Full Cure: 24 Hours

MSDS

GORILLA SUPER GLUE 3g Directions

1. Protect Work Area From Spills

2. Clean and Dry Surfaces to Be Bonded

3. Apply Gorilla Super Glue
Apply a small amount of Gorilla® Super Glue to one surface. Excess glue can cause delayed or failed bond. One drop of super glue covers one square inch.

4. Secure
Press two surfaces together for 10-45 seconds to achieve bond. Note that gaps and uneven surfaces may cause delayed bonding.

For First Aid and SDS information, click here.

Gorilla At Work

Want to see how tough our products are? Watch the videos below to see them in action.

GORILLA SUPER GLUE 3g®FAQs

Why isn’t my bottle of Gorilla Super Glue filled to the top?

For high performance and usability, the adhesive needs to be protected from air. One way to keep the air out of the adhesive is by packaging in thick plastic bottles. If the thicker plastic bottle was completely full of adhesive, it would be too hard to squeeze the glue out of the bottle.

 
GORILLA SUPER GLUE 3g (2pcs)
Directions
Gorilla at Work
Related Products
FAQs

GORILLA SUPER GLUE 3g (2pcs)

TOUGH, FAST, FIX IT AND FORGET IT GLUE

Its high strength and quick set time make Gorilla Super Glue the go-to for a variety of household projects. Developed for long-lasting repairs in an instant, Gorilla Super Glue dries in 10–30 seconds and is reinforced with rubber for increased impact resistance. We call it Impact-Tough® because it stands up to wear and tear unlike any other instant glue. In addition to its high-performance formula, we’ve added an anti-clog cap with a metal pin inside to ensure an airtight seal for maximum reusability. It’s Gorilla tough, every time.

Available Sizes

Available in bottle and squeeze tube formats.

Clamp Time: 10-30 Seconds // Open Time: Not Repositionable

Dry Time: Light Handling after 1-5 Minutes // Dry Color: Translucent

Full Cure: 24 Hours

MSDS

GORILLA SUPER GLUE 3g (2pcs) Directions

1. Protect Work Area From Spills

2. Clean and Dry Surfaces to Be Bonded

3. Apply Gorilla Super Glue
Apply a small amount of Gorilla® Super Glue to one surface. Excess glue can cause delayed or failed bond. One drop of super glue covers one square inch.

4. Secure
Press two surfaces together for 10-45 seconds to achieve bond. Note that gaps and uneven surfaces may cause delayed bonding.

For First Aid and SDS information, click here.

Gorilla At Work

Want to see how tough our products are? Watch the videos below to see them in action.

GORILLA SUPER GLUE 3g (2pcs)®FAQs

Why isn’t my bottle of Gorilla Super Glue filled to the top?

For high performance and usability, the adhesive needs to be protected from air. One way to keep the air out of the adhesive is by packaging in thick plastic bottles. If the thicker plastic bottle was completely full of adhesive, it would be too hard to squeeze the glue out of the bottle.

 
GORILLA SUPER GLUE
Directions
Gorilla at Work
Related Products
FAQs

GORILLA SUPER GLUE

TOUGH, FAST, FIX IT AND FORGET IT GLUE

Its high strength and quick set time make Gorilla Super Glue the go-to for a variety of household projects. Developed for long-lasting repairs in an instant, Gorilla Super Glue dries in 10–30 seconds and is reinforced with rubber for increased impact resistance. We call it Impact-Tough® because it stands up to wear and tear unlike any other instant glue. In addition to its high-performance formula, we’ve added an anti-clog cap with a metal pin inside to ensure an airtight seal for maximum reusability. It’s Gorilla tough, every time.

Available Sizes

Available in bottle and squeeze tube formats.

Clamp Time: 10-30 Seconds // Open Time: Not Repositionable

Dry Time: Light Handling after 1-5 Minutes // Dry Color: Translucent

Full Cure: 24 Hours

MSDS

GORILLA SUPER GLUE Directions

Gorilla Super Glue Directions

  1. Protect Work Area From Spills

  2. Clean and Dry Surfaces to Be Bonded

  3. Apply Gorilla Super Glue

    Apply a small amount of Gorilla® Super Glue to one surface. Excess glue can cause delayed or failed bond. One drop covers one square inch.

  4. Secure

    Press two surfaces together for 10-30 seconds to achieve bond. Note that gaps and uneven surfaces may cause delayed bonding.

Gorilla At Work

Want to see how tough our products are? Watch the videos below to see them in action.

GORILLA SUPER GLUE®FAQs

What if I swallow Gorilla Super Glue?

Do not induce vomiting. Saliva will cause Gorilla Super Glue to polymerize, or harden, in mouth which means the adhesive usually doesn't make it into the throat or stomach.

If lips are bonded together, use warm water to gently separate. The enzymes in saliva will actually help to break the bond, so patience is the key.

Do not use acetone or solvents on or near your mouth. Do not attempt to pull the area apart as this can tear the skin. Seek medical attention.

Gorilla Super Glue should be left out of reach of children and animals.

Have questions or comments? Contact the Gorilla Support Team at 1-800-966-3458 (Monday–Friday, 8 a.m.–5 p.m. Eastern Time). For medical emergencies only, call 1-800-420-7186 anytime to reach a member of our product safety team.

How can I prolong the shelf life?

Moisture that gets into the bottle can cause the adhesive to set up and harden. The best practice is to immediately replace the cap and store in a cool, dry location.

There is a metal pin in the cap of Gorilla Super Glue that helps create a tight seal as well as keep the tip clear of dried adhesive.

We do not recommend storing your Gorilla Super Glue in the refrigerator. Because super glue can release gas, it should not be stored near food.

Why is my bottle of Gorilla Super Glue half full?

For high performance and usability, the adhesive needs to be protected from air. One way keep the air out of the adhesive is by packaging in thick plastic bottles. If the thicker plastic bottle was completely full of adhesive, it would be too hard to squeeze the glue out of the bottle.

Can I apply Gorilla Super Glue to a minor cut or to repair a broken fingernail?

Gorilla Super Glue should not be used for intentional contact with the skin.

How do I remove from my skin or my project?

To remove Gorilla Super Glue from your skin, soak the bonded area in warm soapy water or acetone (finger nail polish remover works well). The key is to be patient and NEVER pull the area apart.

Gently wiggle the area to allow the soapy water or acetone to penetrate the bond. After soaking, the adhesive should come off easily. Keep in mind that acetone can strip your skin of oils, so apply moisturizer after removal.

To remove Gorilla Super Glue from the surface of your project, soak bonded area with warm soapy water or acetone. Keep in mind that acetone can mar the surface material or discolor fabric.

Can Gorilla Super Glue withstand extreme cold temperatures?

Gorilla Super Glue can typically be exposed to temperatures ranging from -40°F to 200°F without breaking down.

However, there can be variation to this range due to the way different substrates expand and contract in extreme temperatures.

Is Gorilla Super Glue heat and water resistant?

Gorilla Super Glue works well in temperatures as high as 200°–220°F. However, too much exposure to extreme heat will cause the strength of the bond to be compromised. Likewise, too much exposure to water, especially warm water, can compromise the strength of the bond.

Can I use Gorilla Super Glue on paper?

Yes, it will work on paper. Only apply a small amount. It is not acid free, therefore, not recommended for scrapbooking.

How do I use Gorilla Super Glue?

Gorilla Super Glue is easy to use. It dries in 10-30 seconds and no clamps are needed. Simply clean the surfaces of your project to get rid of dirt, dust and grease. Apply a small amount of Gorilla Super Glue (more isn’t always better; use one drop per square inch). Then put your pieces together and hold for 10-30 seconds. Note that gaps and uneven surfaces may cause delayed bonding.

You can handle your project lightly after 1–5 minutes. Maximum bond strength is achieved after 24 hours.

After you purchase Gorilla Super Glue, make sure to keep the package for tips and directions.

How is Gorilla Super Glue different from Original Gorilla Glue?

Gorilla Super Glue is a cyanoacrylate adhesive, while Gorilla Glue is a polyurethane. Unlike Gorilla Glue, Gorilla Super Glue does not require extended clamp time or moisture to activate. It does not foam during set up. In addition, Gorilla Super Glue is recommended primarily for indoor applications only.
Gorilla Super Glue is ideal for smaller repairs that require an instant bond and projects where clamping is not needed.

What makes Gorilla Super Glue different from ordinary super glue?

Gorilla Super Glue is reinforced with rubber to secure your projects with a less brittle bond. This helps your project resist bumps, bangs and drops. We call it Impact-Tough®.

GORILLA SUPER GLUE GEL 15g
Directions
Gorilla at Work
Related Products
FAQs

GORILLA SUPER GLUE GEL 15g

TOUGH, NO-RUN, CONTROLLED, INSTANT GLUE

Gorilla Super Glue Gel is an easy-to-use, thicker and more controlled formula great for multiple surfaces and vertical applications. Specially formulated to absorb drops, impacts and shocks, this tough and precise gel bonds plastic*, wood, metal, ceramic, rubber, leather, paper and more! In addition to its high performance formula, we’ve added an anti-clog cap with a metal pin inside to ensure an airtight seal for maximum reusability. It’s Gorilla tough, every time. *Not recommended for use on polyethylene or polypropylene plastic

Available Sizes

15g, 3gx2 tubes

Clamp Time: 10-30 Seconds // Open Time: Not Repositionable

Dry Time: Light Handling after 1-5 Minutes // Dry Color: Translucent

Full Cure: 24 Hours

MSDS

GORILLA SUPER GLUE GEL 15g Directions

Gorilla Super Glue Gel Directions

  1. Protect Work Area From Spills

  2. Clean and Dry Surfaces to Be Bonded

  3. Prepare Gorilla Super Glue Gel

    With cap on bottle, shake product, then turn product upside down and tap on hard surface to shake gel into bottle nozzle.

  4. Apply Gorilla Super Glue Gel

    Remove cap and apply a small amount of Gorilla Super Glue Gel to one surface. Only one dab per square inch recommended. Set time can vary based on the amount of glue and type of surface glued. Excess glue can cause delayed or failed bond.

  5. Secure

    Press the two surfaces together for about 10–30 seconds. Note that gaps and uneven surfaces may cause delayed bonding. Wait 24 hours for a full cure.

Gorilla At Work

Want to see how tough our products are? Watch the videos below to see them in action.

GORILLA SUPER GLUE GEL 15g®FAQs

What if I swallow Gorilla Super Glue?

Do not induce vomiting. Saliva will cause Gorilla Super Glue to polymerize, or harden, in mouth which means the adhesive usually doesn't make it into the throat or stomach.

If lips are bonded together, use warm water to gently separate. The enzymes in saliva will actually help to break the bond, so patience is the key.

Do not use acetone or solvents on or near your mouth. Do not attempt to pull the area apart as this can tear the skin. Seek medical attention.

Gorilla Super Glue should be left out of reach of children and animals.

Have questions or comments? Contact the Gorilla Support Team at 1-800-966-3458 (Monday–Friday, 8 a.m.–5 p.m. Eastern Time). For medical emergencies only, call 1-800-420-7186 anytime to reach a member of our product safety team.

How can I prolong the shelf life?

Moisture that gets into the bottle can cause the adhesive to set up and harden. The best practice is to immediately replace the cap and store in a cool, dry location.

There is a metal pin in the cap of Gorilla Super Glue that helps create a tight seal as well as keep the tip clear of dried adhesive.

We do not recommend storing your Gorilla Super Glue in the refrigerator. Because super glue can release gas, it should not be stored near food.

Why is my bottle of Gorilla Super Glue half full?

For high performance and usability, the adhesive needs to be protected from air. One way keep the air out of the adhesive is by packaging in thick plastic bottles. If the thicker plastic bottle was completely full of adhesive, it would be too hard to squeeze the glue out of the bottle.

Can I apply Gorilla Super Glue to a minor cut or to repair a broken fingernail?

Gorilla Super Glue should not be used for intentional contact with the skin.

How do I remove from my skin or my project?

To remove Gorilla Super Glue from your skin, soak the bonded area in warm soapy water or acetone (finger nail polish remover works well). The key is to be patient and NEVER pull the area apart.

Gently wiggle the area to allow the soapy water or acetone to penetrate the bond. After soaking, the adhesive should come off easily. Keep in mind that acetone can strip your skin of oils, so apply moisturizer after removal.

To remove Gorilla Super Glue from the surface of your project, soak bonded area with warm soapy water or acetone. Keep in mind that acetone can mar the surface material or discolor fabric.

Can Gorilla Super Glue withstand extreme cold temperatures?

Gorilla Super Glue can typically be exposed to temperatures ranging from -40°F to 200°F without breaking down.

However, there can be variation to this range due to the way different substrates expand and contract in extreme temperatures.

Is Gorilla Super Glue heat and water resistant?

Gorilla Super Glue works well in temperatures as high as 200°–220°F. However, too much exposure to extreme heat will cause the strength of the bond to be compromised. Likewise, too much exposure to water, especially warm water, can compromise the strength of the bond.

Can I use Gorilla Super Glue on paper?

Yes, it will work on paper. Only apply a small amount. It is not acid free, therefore, not recommended for scrapbooking.

How do I use Gorilla Super Glue?

Gorilla Super Glue is easy to use. It dries in 10-30 seconds and no clamps are needed. Simply clean the surfaces of your project to get rid of dirt, dust and grease. Apply a small amount of Gorilla Super Glue (more isn’t always better; use one drop per square inch). Then put your pieces together and hold for 10-30 seconds. Note that gaps and uneven surfaces may cause delayed bonding.

You can handle your project lightly after 1–5 minutes. Maximum bond strength is achieved after 24 hours.

After you purchase Gorilla Super Glue, make sure to keep the package for tips and directions.

How is Gorilla Super Glue different from Original Gorilla Glue?

Gorilla Super Glue is a cyanoacrylate adhesive, while Gorilla Glue is a polyurethane. Unlike Gorilla Glue, Gorilla Super Glue does not require extended clamp time or moisture to activate. It does not foam during set up. In addition, Gorilla Super Glue is recommended primarily for indoor applications only.
Gorilla Super Glue is ideal for smaller repairs that require an instant bond and projects where clamping is not needed.

What makes Gorilla Super Glue different from ordinary super glue?

Gorilla Super Glue is reinforced with rubber to secure your projects with a less brittle bond. This helps your project resist bumps, bangs and drops. We call it Impact-Tough®.

GORILLA SUPER GLUE BRUSH & NOZZLE 10g
Directions
Gorilla at Work
Related Products
FAQs

GORILLA SUPER GLUE BRUSH & NOZZLE 10g

TWO WAYS TO DISPENSE SUPER GLUE FOR CONTROL AND ACCURACY

Gorilla Super Glue Brush & Nozzle offers 2 easy ways to dispense for control and accuracy. Brush & Nozzle features a precision tip nozzle and fine bristle brush that allow the user to control their super glue application, making it perfect for any project. Developed for long-lasting repairs in an instant, Gorilla Super Glue dries in 10–45 seconds and is reinforced with rubber for increased impact resistance. We call it Impact-Tough® because it stands up to wear and tear unlike any other super glue. In addition to its high-performance formula, we’ve added an anti-clog cap with a metal pin inside to ensure an airtight seal for maximum reusability. Super glue, also referred to as cyanoacrylate glue, or CA glue, works on a variety of materials, including plastic, metal, fabric, stone, ceramic, paper, rubber and more. It’s Gorilla tough, every time.

PRODUCT FEATURES

  • Two ways to dispense for greater control and versatility!
  • Fine bristle brush for controlled coverage with less mess
  • Precision tip nozzle for quick, easy dispensing
  • Impact Tough: Unique rubber particles increase impact resistance and strength
  • Fast-setting: Dries in 10-45 seconds, no clamping required.
MSDS

GORILLA SUPER GLUE BRUSH & NOZZLE 10g Directions

  1. Protect Work Area From Spills
  2. Clean and Dry Surfaces to Be Bonded
  3. Apply Gorilla Super Glue

    Apply a small amount of Gorilla® Super Glue to one surface. Excess glue can cause delayed or failed bond. One drop covers one square inch.

    To use nozzle, unscrew upper cap and remove. To use brush, unscrew full cap and wipe the brush on the inner rim of the bottle to remove excess glue.

  4. Secure

    Press two surfaces together for 10-45 seconds to achieve bond. Note that gaps and uneven surfaces may cause delayed bonding.

Gorilla At Work

Want to see how tough our products are? Watch the videos below to see them in action.

GORILLA SUPER GLUE BRUSH & NOZZLE 10g®FAQs

Is Gorilla Super Glue Brush & Nozzle glue formula the same as original Gorilla Super Glue?

Yes. Gorilla Super Glue Brush & Nozzle use the same formula as original Gorilla Super Glue.

 
When should I use the brush versus the nozzle?

Use of the brush versus the nozzle is up to the user’s preference. The fine bristled brush is designed for controlled coverage with less mess. The precision tip nozzle is designed for quick, easy dispensing.

 
Will the bristles of the brush harden in the glue?

If used and stored according to directions, the brush should not harden in the glue.