大猩猩木材專用膠水18安士裝
Directions
Gorilla at Work
Related Products
FAQs

大猩猩木材專用膠水18安士裝

強力、不會起泡、乾透後呈天然木材顏色

大猩猩木材專用膠水是木工,木匠和業餘愛好者為其木工項目所信賴的粘合劑。 大猩猩木材專用膠水,是一種PVA膠,具有易於使用的水基膠粘劑的優點,並具有能穩住大猩猩的能力而聞名。 該膠水俱有極高的防水性,並且乾固後為自然顏色,為您的項目提供了隱形的粘合線。
 
- 快速完成項目:僅需要20-30分鐘的夾緊時間,並在24小時內完全固化。
- 使用室內或室外:通過ANSI / HPVA II類防水性能。
多功能:理想用於硬木,軟木和天然木材複合材料。
- 乾固後為自然顏色:提供自然的粘合線。
MSDS

大猩猩木材專用膠水18安士裝 Directions

Gorilla Wood Glue Directions

  1. Application

    For best results, it is essential that the wood surfaces are prepared prior to application of glue. For laminating, the surfaces should be planed smooth, leaving the board surface free from machine marks, tear-out and snipes. Also, be careful to avoid burnishing and end snipes. Just how much Gorilla Wood Glue to apply depends on many factors. In general, apply a generous amount of glue on one of the surfaces. On hard-to-glue woods, apply the glue on both surfaces. Rub together with the other surface to distribute the glue evenly on both surfaces. Enough glue should be applied so that a fine bead of glue squeeze-out will occur when clamping. Coverage: 1 gallon of Gorilla Wood Glue will cover about 200 square feet. 1 fluid ounce will cover approximately 1.6 square feet.

  2. Clamping

    The technique and type of clamp to be used is determined by many factors: the specific type of joint, type of stock or lumber, moisture content of stock, room temperature, assembly time and surface quality. In general, apply enough pressure that will cause a fine bead of glue to squeeze out when the proper pressure is applied.

    Clamping Time (amount of time pressure needs to remain applied): 20–30 minutes for room temperature applications. The temperature must be above 55°F. Note that clamping time can be dependent on temperature, humidity, and the porosity of the wood.

    Cure Time (amount of time for glue to reach total bonding strength): 24 hours

  3. Clean Up

    Clean up while glue is wet: Use a clean, damp cloth to wipe off excess glue. Make as many passes as needed with the clean area of the cloth to remove all the glue. When areas have completely dried, sand as needed. Wash hands, skin and damp cloths in soap and warm water, then rinse.

    Clean up when glue has dried: Use a sharp putty knife, razor, or sharp scraper to shave hardened glue from surface, then sand as needed. Soak hands and skin in soap and warm water, wash, then rinse.

    Cleaning the bottle tip: Use a clean, damp cloth to wipe off excess glue after closing. If tip becomes clogged with dry glue, remove the cap and push the clog backwards with a toothpick, then rinse cap with warm water.

    To remove Gorilla Wood Glue from hands, wash with warm soap and water.

Gorilla At Work

Want to see how tough our products are? Watch the videos below to see them in action.

大猩猩木材專用膠水18安士裝®FAQs

What should I do if I think a human or animal has ingested Gorilla Wood Glue?

For medical emergencies, call 1-800-420-7186 anytime to reach a member of our product safety team. Additional product safety and first aid information can be found here.

How do I remove Gorilla Wood Glue from my body or skin?

To remove Gorilla Wood Glue from hands, wash with soap and warm water.

How do I remove Gorilla Wood Glue from my surface?

To clean up while glue is wet, use a clean, damp cloth to wipe off excess glue. Make as many passes as needed with the clean area of the cloth to remove all the glue. When areas have completely dried, sand as needed. To clean up glue that has dried, use a sharp putty knife, razor, or sharp scraper to shave hardened glue from surface, then sand as needed.